Easy-Link Multi-System:

LINK UP TO 4 T-K3 HEATERS TOGETHER FOR A REMARKABLE 28 GALLONS PER MINUTE

• --Maximum 4 units (without the need for a multi-unit controller like the TM-RE20)
• --TM-RE10 is the remote control for the T-K3. It is optional and not necessary for the multi unit system
• --Easy-Link wire comes with each heater

8 temperature settings with dip switches

• --104°F, 113°F, 122°F(default), 131°F, 140°F, 158°F, 176°F and 185°F

Air-Fuel Ratio Rod

• --Replaces the function of the pressure switch, which is used in all existing models. Blockage of the intake or exhaust vent will adversely affect the flame condition, which the air-fuel ratio rod detects.

Freeze Protection

• --In addition to the ceramic heaters for freeze protection, the heater will ignite to protect the heat exchanger. The freeze protection is rated down to -22 ºF in a wind-free environment

Natural Gas Input	Min. 11,000 Btu	Max. 199,000 Btu
LPG Input	Min. 11,000 Btu	Max. 199,000 Btu
Gas Connection	3/4" NPT
Water Connections	3/4" NPT
Water Pressure	Min. 15 psi	Max. 150 psi
Natural Gas Pressure Inlet	Min. 5" WC	Max. 10.5" WC
LP Gas Pressure Inlet	Min. 8" WC	Max. 14" WC
Manifold Pressure	Natural 2.5" WC	Propane 4.4" WC
Weight	40 lbs.
Dimensions	20.5" x 13.8" x 8.5"
Ignition	Electronic Ignition
Electrical Supply	AC 120 V
Water Flow Rate	Min. 0.5 GPM Max 7GPM
Outlet Water Temperature	Min. 104 Degrees F--Max 185 Degrees F

Click on the links below for more information:

The following links require Adobe Acrobat.
To download the latest version, click here

(1) Installation Manual and Owners Guide & Specs
(2) Specification Side A
(3) Specification Side B(2) Basic System
(4) Hydronic & Domestic Heating
(5) Hydronic Heating Only
(6) Radiant & Domestic Heating
(7) Radiant Heating Only
(8) With Recirculation Only
(9) With Storage Tank
(10) Takagi Warranty Info & Registration